HE Driver Installation Manual

Update time:

12/17/2024

Driver version: 1.0.0.12

Firmware version: 1.13

Muse65 Driver.zip

Muse65 Driver.exe

Updates：

    1. Optimize the BUG in the advanced key setting
    2. Optimize the default opening mode to administrator privileges
    3. Optimize the music rhythm amplitude adjustment
    4. Add the TTC King of Magnetic switch option(non-RGB and Pom version)
    5. Optimize the error of reading firmware version time

      Driver Installation

      1. Please choose your language to install. 

      2. Before the driver installation concludes, an environment setup program will appear, as shown in the screenshot below. If this is your first time installing the driver, please click "Confirm Installation." Upon completion, a success notification will be displayed.

      3. After the initial driver installation, upon the first connection, the driver will automatically detect the firmware version and prompt you to update. Please select the appropriate firmware update for the corresponding layout version.
      4. Please select the appropriate firmware update for the corresponding layout version.

      5. After installing the driver, it is necessary to calibrate the keyboard, and the corresponding position is indicated in the figure below.

        The calibration keyboard operation is to long press the button.green indicates successful calibration, while yellow indicates calibration failure. For the initial calibration, ensure all keys are calibrated to green.

        After completing the calibration, you can click the calibration button to exit thcalibration. Then it can be used normally.

      6. The firmware and driver can be upgraded directly through the firmware update button in the driver.

      Q: How to change the Driver layout?

      A: Open the driver, unplug the cable, hold the ESC key, and plug the cable

       

      Troubleshooting:

      1：Unable to use the driver to upgrade the firmware normally;
      The driver is stuck in the firmware upgrade interface;
      The latest version is still not available after the upgrade

      Please try this:

      Open the driver, unplug the cable, hold the ESC key, and plug the cable

       

      2：Can't change backlit;

      Light are reds

      Please calibrate the keys, then you can change the backlit.